Engine/Fuel Control System

Accelerator Pedal Repair Procedures

3steps
~18min
2/5difficulty
0102030405015.712N·mlb·ft
Tightening torque found on this page
Done 0 of 3

DEPOSIT

  1. Turn the ignition key to the OFF position and disconnect the negative (-) battery cable.
  2. Disconnect the throttle position sensor connector (A).
  3. Loosen the mounting nuts (B) and remove the accelerator pedal module.

REMEDY

  1. To install, reverse the removal procedure. Accelerator pedal module mounting nut: 12.7 ~ 15.7 N·m

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.