Blade Replacement

When the wipers no longer clean properly, the blades may be worn or cracked and require replacement.

NOTICE

To avoid damaging the wiper arms or other components, do not attempt to move the wipers by hand.

NOTICE

Using a wiper blade not specified for your vehicle may cause wiper malfunction and failure.

NOTICE

• To avoid damaging the hood and wiper arms, raise the arms to the upright position only for cleaning.
• Always return the wiper arms to the windshield before driving.

Enter

1. Lift the wiper blade clip. Then lift the wiper blade.

2. Press the lock (1) and pull down the wiper blade (2).

3. Remove the wiper blade from the wiper arm.

4. Install the new wiper blade assembly in the reverse order of removal.

5. Return the wiper arm to the windshield.

Type B

1. Raise the wiper arm.

2. Lift the wiper blade clip. Then pull the blade assembly down and remove it.

3. Install the new wiper blade assembly in the reverse order of removal.

4. Return the wiper arm to the windshield.

Rear Wiper Blade

1. Raise the wiper arm and pull out the wiper blade assembly.

2. Install the new blade assembly by inserting the center part into the slot in the wiper arm until it clicks.

3. Make sure the blade assembly is securely installed by gently pulling on it.

To avoid damage to the wiper arms or other components, it is recommended that the wiper blades be replaced by an authorized HYUNDAI dealer.