Warning Message

Blind-Spot Collision Warning (BCW) system is turned off. Radar is blocked.

• This warning message may appear when:

- One or both of the rear bumper sensors are blocked by dirt, snow, or a foreign object.
- Driving in rural areas where the BCW sensor does not detect another vehicle for an extended period.
- Driving in bad weather, such as heavy snow or rain.
- A trailer or carrier is installed. When using the BCW system, remove the trailer or carrier from your vehicle.

When any of these conditions occur, the BCW switch indicator and the system will turn off automatically.

When the BCW cancellation warning message is displayed in the cluster, check that there is no mud or snow on the rear bumper at the sensor locations. Remove any mud, snow, or foreign material that may interfere with the radar sensors.

After removing any dirt or debris, the BCW system should operate normally after approximately 10 minutes of driving.

If the system still does not operate normally, have the vehicle inspected by an authorized HYUNDAI dealer.

Information

Turn off the system by pressing the BCW switch and disabling Rear Cross-Traffic Collision Warning (RCCW) in the User Settings mode on the cluster when using a trailer or carrier behind your vehicle.

Inspect the Blind-Spot Collision Warning (BCW) system.

If there is a problem with the BCW system, a warning message will appear and the indicator light on the switch will turn off. The system will turn off automatically. We recommend having the vehicle checked by an authorized HYUNDAI dealer.