Hyundai Palisade Quiz
Body Electrical System

Anti-pinch strip

In this manual: Body Electrical System
General Information — 10Engine Mechanical System — 56Engine Electrical System — 28Emission Control System — 21Engine Control System/Fuel System — 42Automatic Transmission System (A8LF1) — 33All-Wheel Drive (AWD) System — 16Drive Shaft and Axle — 19Suspension System — 28Steering — 17Restraints — 20Brake System — 39Body (Interior and Exterior) — 142Body Electrical System — 171Heating, Ventilation, and Air Conditioning — 47Advanced Driver Assistance System (ADAS) — 44
7steps
~42min
2/5difficulty
Done 0 of 7

Repair Procedures

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear door trim panel. (Refer to Body - "Rear Door Trim")
  3. Disconnect the anti-pinch sensor connector (A).
    Hyundai Palisade. Repair procedures
  4. Remove the anti-pinch strip (A) after removing the clips.
    Hyundai Palisade. Repair procedures

Installation

  1. Install the power tailgate anti-pinch strip.
  2. Install the liftgate trim.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.