Body Electrical System

Power tailgate

10steps
~60min
3/5difficulty
Done 0 of 10

Components and Component Location

Components

Hyundai Palisade. Components and components location
Hyundai Palisade. Components and components location

Circuit Diagrams

Wiring Diagram

Hyundai Palisade. Schematic diagrams

Repair Procedures

Removal

Hyundai Palisade. Repair procedures
  1. After replacing the power liftgate module with a new one, check the DTC continuously. If DTC B24B0 is present, perform the power liftgate mode change. (Refer to Power Liftgate Module - Troubleshooting)
  2. After replacing the power liftgate module with a new one, perform system initialization. (Refer to Power Liftgate Module - Troubleshooting)
  3. Before delivering the vehicle to the customer, operate the power liftgate to make sure there is no audible warning.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear left luggage side trim. (Refer to Body - Luggage Side Trim)
  3. Disconnect the power liftgate control unit connectors (A).
    Hyundai Palisade. Repair procedures
  4. Remove the power liftgate control unit (A).
    Hyundai Palisade. Repair procedures

Installation

  1. Install the power liftgate control unit.
  2. Install the rear left luggage side trim.
  3. Connect the negative (-) battery terminal.

Inspection

Inspection of the Power Liftgate System

Refer to Power Liftgate System - Troubleshooting.

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.