Hyundai Palisade Quiz
Brake System

Downhill Brake Control Switch

In this manual: Brake System
General Information — 10Engine Mechanical System — 56Engine Electrical System — 28Emission Control System — 21Engine Control System/Fuel System — 42Automatic Transmission System (A8LF1) — 33All-Wheel Drive (AWD) System — 16Drive Shaft and Axle — 19Suspension System — 28Steering — 17Restraints — 20Brake System — 39Body (Interior and Exterior) — 142Body Electrical System — 171Heating, Ventilation, and Air Conditioning — 47Advanced Driver Assistance System (ADAS) — 44
3steps
~18min
2/5difficulty
Done 0 of 3

Description and Operation

Description

The DBC function is an abbreviation for Downhill Brake Control. When the vehicle is driving downhill, simply pressing the DBC switch allows the vehicle to maintain its vehicle speed at a constant level without depressing the brake pedal. The DBC function operates when the vehicle is driving downhill and its speed is below the set speed.

Repair Procedures

Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the floor console upper cover. (Refer to Body - "Floor Console")
  3. Remove the DBC switch (A) after loosening the screw.
    Hyundai Palisade. Repair procedures

Installation

  1. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.