Engine Mechanical System
Intake Manifold
In this manual: Engine Mechanical System
6steps
~36min
2/5difficulty
Done 0 of 6
Components and Component Location
Components

| 1. Intake Manifold | 2. Intake manifold gasket |
Repair Procedures
Removal and Installation
- Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Engine Cover")
- Remove the air cleaner assembly. (Refer to Air Intake and Exhaust System - "Air Cleaner").
- Remove the expansion tank. (Refer to Intake and Exhaust System - "Expansion Tank")
- Remove the low pressure fuel line bolts (A).

- Remove the intake manifold (A).


- Cover the cylinder head intake port with clean shop cloth or vinyl to prevent foreign material from entering the port.
- Otherwise, engine coolant may enter the intake port from the cylinder head coolant passages, causing problems in the engine combustion chambers.
- Install in the reverse order of removal.
Tightening torque: Step 1: 3.9–5.9 N·m Step 2: 26.5–31 N·m Step 3: Repeat step 2 two or more times.
- Tighten the intake manifold bolts and nuts in several passes, as shown below.

Test yourself
A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?