Engine/Fuel Control System
Accelerator Pedal Repair Procedures
In this manual: Engine/Fuel Control System
3steps
~18min
2/5difficulty
Done 0 of 3
DEPOSIT
- Turn the ignition key to the OFF position and disconnect the negative (-) battery cable.
- Disconnect the throttle position sensor connector (A).
- Remove the mounting bolt (B) and nuts (C), then remove the accelerator pedal module.

REMEDY
- To install, reverse the removal procedure. Accelerator pedal module nut: 12.8~15.7 N·m Accelerator pedal module bolt: 8.8–13.7 N·m
Test yourself
A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?