Hyundai Tucson Quiz
Engine/Fuel Control System

Fuel Pressure Regulator Repair Procedures

In this manual: Engine/Fuel Control System
General Information — 17Engine Mechanical System — 51Engine Electrical System — 26Emission Control System — 23Engine/Fuel Control System — 44Clutch System — 12MANUAL TRANSMISSION SYSTEM — 12AUTOMATIC TRANSMISSION SYSTEM — 42Four-Wheel Drive (4WD) System — 14Drive Shaft and Axle — 22Suspension System — 30Steering System — 16Restraint — 21Braking System — 47Body Work (Interior and Exterior) — 145Body Electrical System — 162Heating, Ventilation and Air Conditioning — 39
7steps
~42min
2/5difficulty
Done 0 of 7

DEPOSIT

  1. Remove the fuel pump. (Refer to Fuel System - "Fuel Pump".)
  2. Disconnect the fuel level sensor wiring connector (A) and the electric pump wiring connector (B).
  3. Remove the retaining bracket (A), then disconnect the supply hose (B).
  4. Remove the main assembly (C) by releasing the retaining clip and cushion (D).
  5. Remove the tank cover as soon as the retaining hooks (A) are released.
  6. Remove the fuel pressure regulator clamp (A).
  7. Remove the fuel pressure regulator (B) from the fuel filter.

REMEDY

  1. To install, perform the removal procedure in reverse order.

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.