Electrochromic Mirror (ECM) with HomeLink® System

Your vehicle may be equipped with a Gentex auto-dimming mirror with an integrated HomeLink® Wireless Control System.

When driving at night, this function automatically detects and reduces rearview mirror glare. The HomeLink® Universal Transceiver allows you to operate your garage door, electric gate, home lighting, etc.

(1) HomeLink Button 1
(2) HomeLink Button 2
(3) HomeLink Button 3
(4) Garage Door Opener Status Indicator: Close or Closing
(5) HomeLink Activity Indicator
(6) Garage Door Opener Status Indicator: Open or Opening
(7) HomeLink User Interface Indicator

Night Vision Safety™ (NVS®) Auto-Dimming Mirror

The NVS® mirror automatically reduces glare by monitoring the light level in the front and rear of the vehicle. Any object that blocks any light sensor will degrade the automatic dimming function.

Your mirror automatically dims when it detects glare from vehicles behind you.

The mirror defaults to the ON position each time the vehicle is started.

Integrated HomeLink® Wireless Control System

The HomeLink® Wireless Control System provides a convenient way to replace up to three hand-held radio transmitters used to operate compatible devices such as gate operators, garage door openers, entry door locks, security systems, and home lighting.

NOTICE

HomeLink® operates when the ignition switch is in the ACC or ON position for safety reasons. This is necessary to prevent unintended security problems when the vehicle is parked outside the garage.

WARNING

Before programming HomeLink® to operate a garage door or gate operator, make sure that people and objects are clear of the device to prevent potential injury or damage. Do not use HomeLink® with a garage door opener that lacks the safety stop and reverse features required by U.S. federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door that cannot detect an object and signal the door to stop and reverse does not meet current U.S. federal safety standards. Using a garage door opener without these features increases the risk of serious injury or death.

For more information, contact HomeLink® at www.homelink.com or call HomeLink Customer Support at 1-800-355-3515.

It is also recommended to install a new battery in the hand-held transmitter of the device being trained to HomeLink® for faster training and accurate radio frequency transmission.

1. HomeLink® Programming

The following steps show how to program HomeLink. If you have questions or experience difficulty programming the HomeLink buttons, see the HomeLink website or call HomeLink Customer Support toll-free. Do this before returning to the dealer who sold you the vehicle.

• Visit the HomeLink website at www.homelink.com. Then, at the top of the page, select your vehicle make. Then watch the videos on YouTube and/or access additional information on the website.
• If you choose to access the website through your mobile phone, scan the QR code.
  
• Or call HomeLink Customer Support at 1-800-355-3515 (please have the vehicle make/model and the make/model of the opener readily available.)

1) Preparation for Programming

1. When programming a garage door opener, it is recommended that you park the vehicle outside the garage.

2. It is recommended to install a new battery in the hand-held transmitter of the device being programmed to HomeLink for faster training and accurate radio frequency transmission.

3. Turn the ignition switch to the ACC (Accessory) position to program HomeLink.

2) Programming a New HomeLink®

1. Press and release the HomeLink button (1), (2) or (3) you want to program. The HomeLink indicator (7) will slowly flash orange (if it does not, follow the steps in "Erasing HomeLink Buttons" and start over).

2. Position the hand-held remote control of the garage door opener 1–3 in. (2–8 cm) away from the HomeLink button.

3. While the HomeLink indicator (7) is flashing orange, press and hold the hand-held remote button. Continue holding the hand-held remote button until the HomeLink indicator (7) changes color from orange to green. You can now release the hand-held remote button.

4. Wait until the garage door stops moving, regardless of its position, before proceeding to the next steps.

5. Press and release the HomeLink button being programmed, and observe the indicator.