Intelligent Speed Limit Assist Malfunction and Limitations

Intelligent Speed Limit Assist Malfunction

When the Intelligent Speed Limit Assist is not operating properly, the "Check Speed Limit Assist System" warning message may appear and () warning light may illuminate on the instrument cluster. Have the vehicle inspected by an authorized HYUNDAI dealer.

Intelligent Speed Limit Assist is incomplete

If the front view camera is covered or blocked, its detection performance is reduced, and Intelligent Speed Limit Assist may be temporarily limited or disabled.

Speed Limit Assist is disabled. A camera blocked warning message may appear on the instrument cluster.

If Intelligent Speed Limit Assist does not operate normally after the sensor has been covered or unblocked, have the vehicle inspected by an authorized HYUNDAI dealer.

WARNING

Intelligent Speed Limit Assist may not operate properly even if there is no warning message or indicator light on the instrument cluster.

Intelligent Speed Limit Assist Limitations

Intelligent Speed Limit Assist may not function or may be limited if:

• The road sign is damaged, difficult to see due to rain, snow, fog, dirt, sand, oil, etc., or is blocked by surrounding objects or shadows.
• The road signs do not conform to the standard designs in your country.
  - The text or image on the road sign differs from the standard design in your country.
  - The road sign is installed between the main road and an exit ramp, or between diverging roads.
  - The sign is attached to another vehicle.
• The distance between the lane and the road sign is large.
• There are LED road signs.
• Numbers or images on the road sign are incorrectly recognized as a speed limit.
• Road signs on adjacent roads are incorrectly recognized as road signs for the road you are driving on.
• Several signs are installed close together.
• Additional road signs or plates are installed near the road sign.
• A minimum speed limit sign is incorrectly recognized as a maximum speed limit sign.
• Brightness changes suddenly, for example when entering or exiting a tunnel or passing under a bridge.
• The headlights are not used, or the headlight brightness is low at night or in a tunnel.
• Road signs are difficult to recognize due to reflection of sunlight, street lights, or oncoming vehicles.
• Sunlight blocks the field of view of the front view camera.
• You are driving on a road that is sharply curved or continuously curved.
• You are driving over speed bumps, or moving up and down or left and right on steep slopes.
• Your vehicle is shaking strongly.
• There is an error in the navigation map data or GPS data.
• You are not driving your vehicle along the guided route.
• You are driving on a recently opened road.
• The navigation system was updated while driving or restarting.

Information

For more information on the limitations of the front view camera, see "Forward Collision-Avoidance Assist (FCA)" in this chapter.