Power Seats - Seat Adjustment

The front seat can be adjusted using the control switches located on the outside of the seat cushion.

WARNING

Never leave children unattended in the vehicle. Power seats operate when the vehicle is off.

NOTICE

To prevent damage to the seats:

• Always stop adjusting the seat once it has reached the full forward or rearward position.
• Do not adjust the seats longer than necessary when the vehicle is turned off. This may cause unnecessary battery discharge.
• Do not operate two or more seats at the same time. This may cause an electrical malfunction.

Forward and Backward Adjustment

To move the seat forward or backward:

1. Press the control switch forward or backward.

2. Release the switch as soon as the seat reaches the desired position.

Seatback Angle

To recline a seatback:

1. Press the control switch forward or backward.

2. Release the switch as soon as the seatback reaches the desired position.

Seat Cushion Tilt

To adjust the angle of the front part of the seat cushion:

1. Press the front part of the switch up to raise or down to lower the front part of the seat cushion.

2. Release the switch as soon as the seat reaches the desired position.

Seat Height

To adjust the seat height:

1. Press the rear part of the switch up to raise or down to lower the seat height.

2. Release the switch as soon as the seat reaches the desired position.

Lumbar support (driver's seat, if equipped)

To adjust the lumbar support:

1. Press the front part of the switch