Reprogramming a Single HomeLink® Button

To program a new device to a previously trained HomeLink® button, perform the following steps:

1. Press and hold the desired HomeLink® button. DO NOT release until step 4 has been completed.

2. When the indicator starts flashing slowly (after 20 seconds), position the handheld transmitter 1 to 3 inches from the HomeLink® surface.

3. Press and hold the handheld transmitter button. The HomeLink® indicator will flash slowly, then rapidly.

4. When the indicator starts flashing rapidly, release both buttons.

5. Press and hold the newly trained HomeLink® button and observe the red status indicator LED. If the indicator remains on continuously, programming is complete and your new device should activate.