Hyundai Tucson LM Quiz
Convenient Features of Your Vehicle

Standard Programming

In this manual: Convenient Features of Your Vehicle
Your Vehicle at a Glance — 5Safety Features of Your Vehicle — 51Convenient Features of Your Vehicle — 168Multimedia System — 91Driving Your Vehicle — 66What to Do in an Emergency — 19Maintenance — 2Specifications, Consumer Information and Safety Defect Reporting — 13
~1min read

To train most devices, follow these instructions:

1. For initial programming, press and hold the two outer HomeLink® buttons, Channel 1 and Channel 3, until the indicator begins to flash (after approximately 20 seconds).

Release both buttons. Do not hold the buttons for longer than 30 seconds.

2. Position the end of the handheld transmitter 1–3 inches (2–8 cm) from the HomeLink® button, keeping the status light in view.

3. Simultaneously press and hold the HomeLink® button and the handheld transmitter button. Do NOT release the buttons until step 4 is complete.

4. Continue holding the buttons. The red status indicator LED will flash slowly, then quickly, once HomeLink® has successfully learned the frequency signal from the handheld transmitter. Release both buttons.

5. Press and hold the newly trained HomeLink® button and observe the red status indicator LED. If the indicator stays on steadily, programming is complete and your device should activate when the HomeLink® button is pressed and released.

6. To program the remaining two HomeLink® buttons, follow steps 2 through 5.

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.