Hyundai Tucson LM Quiz
Automatic Transmission

Shift Lever Repair Procedures

In this manual: Automatic Transmission
General Information — 1Engine Mechanical System — 44Engine Electrical System — 45Emission Control System — 24Engine Control System/Fuel System — 93Clutch System — 13Manual Transmission — 18Automatic Transmission — 87Four-Wheel Drive (4WD) System — 26Drive Shaft and Axle — 29Suspension System — 35Steering — 20Restraints — 47Brake System — 36Body (Interior and Exterior) — 53Body Electrical System — 202Heating, Ventilation, and Air Conditioning — 58
5steps
~30min
2/5difficulty
0102030405013.710N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Removal

  1. Pull the handle (A) in direction "F" and remove it, then remove the console upper cover.
  2. Remove the console. (Refer to Body - "Floor Console")
  3. Disconnect the connector (A) from the shift lever.
  4. Disconnect the shift cable (A) from the shift lever.
  5. Remove the shift lever (A) after removing the bolts.

    Tightening torque: 8.8 - 13.7 N·m

Installation

  1. Installation is the reverse of removal.
    When installing, set the cabin-side shift lever and the T/M-side manual control lever to the N position.

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.