Turn Signals and Lane Change Signals

To signal a turn, move the lever up for a right turn or down for a left turn to position (A). The lever will return to the OFF position after the turn is completed.

To signal a lane change, lightly move the lever and hold it in position (B). The lever will return to the OFF position when released.

One-Touch Lane Change Signal (if equipped)

To activate the one-touch three-blink turn signal, lightly push the turn signal lever and then release it. The lane change signals will flash 3 times.

CAUTION

If the turn signal indicator stays on and does not flash, or if it flashes abnormally, the bulb may be burned out or have a poor electrical connection in the circuit. The bulb may need to be replaced.