Jack Location

The jack and lug wrench are located at the rear of the cargo area. To remove the jack and tools, perform the following steps:

1. 1
   Lift the cargo area floor.

   

   Cargo Floor

   NOTE:

   The cargo floor panel can be removed for access by pulling the cargo floor straight back.

2. 2
   Remove the equipment compartment cover by pressing the latch on the left side and pulling up.

   

   Equipment Compartment Cover Latch

3. 3
   Turn the plastic wing nut counterclockwise to loosen the jack from the storage compartment.

   

   Plastic Wing Nut Location

4. 4
   Remove the tool kit and assemble the tools.