Removing the Soft Top

Use this QR code to access the digital experience.

1. 1
   Fully Lower the Soft Top
2. 2
   Make sure the assist lift mechanism is engaged. Both the left and right sides must be in the "locked" position, and you should hear a click when pressing No. 1 bow on each of the lift mechanisms before removal.

   

   Step Two

3. 3
   Using the supplied Torx #40 screwdriver and ratchet, remove the two Torx screws on each lift mechanism, then lift the mechanism up and away from the vehicle.

   

   Step Three

   1. Lock Position

   2. Torx Head Screw

   3. Torx Head Screw

4. 4
   Pull the release lever at the top of the rail back to release the side brace from the track.

   

   Step Four

   

   Step Four

5. 5
   Repeat on the opposite side.
6. 6
   With two people, lift the soft top and move it away from the vehicle, taking care not to scratch the vehicle body, interior trim and tire carrier. Store the soft top in a safe, clean and dry location.

   

   Step Six

7. 7
   Using the supplied Torx #50 screwdriver and ratchet, remove the Torx screw on both rear corners of the vehicle, then remove the bracket.

   

   Step Seven