Self-Diagnosis System
Subthrottle Sensor Resistance Inspection
In this manual: Self-Diagnosis System
~1min read
- Turn the ignition switch to OFF.
- Disconnect the subthrottle sensor connector.
- Connect a digital meter [A] to the subthrottle sensor connector [B].
- Measure the subthrottle sensor resistance.
Subthrottle Sensor Resistance Connections: BL lead [D] ←→ BR/BK lead [C] Standard: 4 
6 kΩ
If the reading is out of the standard, replace the throttle body assy.
If the reading is within the standard, but the problem still exists, replace the ECU (see ECU Removal/Installation in the Fuel System (DFI) chapter).
Subthrottle Sensor Circuit
1. ECU
2. Subthrottle Sensor
3. Main Throttle Sensor
Test yourself
A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?