Kia Cadenza VG Owner's Manual Quiz
Engine Mechanical System

Rear Oil Seal Repair Procedures

In this manual: Engine Mechanical System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
7steps
~52min
4/5difficulty
2special tools
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Removal

  1. Remove the transaxle assembly. (Refer to Automatic Transaxle System - "Automatic Transaxle")
  2. Remove the drive plate. (Refer to Cylinder Block - "Drive Plate")
  3. Remove the rear oil seal (A).
  4. Remove the rear oil seal retainer (A).

Installation

  1. Install the rear oil seal retainer (A).

    Tightening torque: 9.8 ~ 11.8 N·m
    • Clean the sealing surfaces before assembling the two parts.
    • Remove harmful foreign material from the sealing surface before applying sealant.
    • Before installing the rear oil seal retainer, apply liquid gasket TB1217H to the rear oil seal retainer.
    • Assemble the parts within 5 minutes after applying the sealant.
    • Apply sealant to the internal threads of the bolt holes.
  2. Using SST (09231-3C200, 09231-H1100), install the rear oil seal.
    Do not reuse the rear oil seal.
  3. Install the remaining parts in the reverse order of removal.

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.