Rear Coil Spring

Repair Procedures

Removal and Installation

1. 1

   Remove the rear wheel and tire (A).

   Tightening torque: 107.9–128 N·m

   

2. 2

   Separate the rear shock absorber (A) from the rear knuckle by loosening the lower mounting bolt and nut.

   Tightening torque: 137.3–157 N·m

   

3. 3

   Disconnect the rear stabilizer link (A) by loosening the nut.

   Tightening torque: 58.8–78 N·m

   

4. 4

   Separate the lower arm (A) by loosening the bolts and nuts (B).

   Tightening torque:

   Bolt and nut (B): 137.3–157 N·m

   

5. 5

   Remove the rear coil spring (A).

   

6. 6

   Remove the upper spring pad (A) and the lower pad (B).

   

7. 7

   Install in the reverse order of removal.

8. 8

   Check the wheel alignment.

   (Refer to Rear Suspension System — Rear Wheel Alignment)

Inspection

1. 1

   Check the spring for deformation, aging, or damage.

2. 2

   Check the upper and lower spring seats for wear or damage.