Suspension System

Rear Assist Arm Repair procedures

7steps
~42min
3/5difficulty
04080120160200127.594N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Removal

  1. Disconnect the battery negative cable.

  2. Remove the wheel and tire.

    Tightening torque: 107.9 - 128 N·m

  3. Loosen the bolts (A,B) and then remove the rear assist arm.

    Tightening torque:

    (A) 107.9 - 118 N·m

    (B) 137.3 - 157 N·m

  4. Install in the reverse order of removal.

  5. Check the wheel alignment.

    (Refer to Suspension System - "Alignment")

Inspection

  1. Check the bushing for wear and deterioration.

  2. Check all bolts and nut.