Suspension System

Rear Lower Arm Repair procedures

9steps
~54min
3/5difficulty
04080120160200127.594N·mlb·ft
Tightening torque found on this page
Done 0 of 9

Removal

  1. Disconnect the battery negative cable.

  2. Remove the wheel and tire.

    Tightening torque: 107.9 - 128 N·m

  3. Loosen the rear lower arm bolt (A,B), rear shock absorber bolt (C) and stabilizer link bolt (D) and then remove the rear lower arm.

    Tightening torque:

    (A) 107.9 - 118 N·m

    (B) 137.3 - 157 N·m

    (C) 98.0 - 118 N·m

    (D) 19.6 - 29 N·m

  4. Install in the reverse order of removal.

  5. Check the wheel alignment.

    (Refer to Suspension System - "Alignment")

Inspection

  1. Check the bushing for wear and deterioration.

  2. Check the rear lower arm for deformation.

  3. Check the coil spring and spring pad for deterioration and deformation.

  4. Check all bolts and nut.