Suspension System
Rear Stabilizer Bar Repair procedures
In this manual: Suspension System
7steps
~42min
3/5difficulty
Done 0 of 7
Removal
Disconnect the battery negative cable.
Remove the wheel and tire.
Tightening torque: 107.9 - 128 N·m

Loosen the rear stabilizer link bolt (A).
Tightening torque: 19.6 - 29 N·m

Loosen the bolts (A) and then remove the rear stabilizer bar.
Tightening torque: 44.1 - 54 N·m

Install in the reverse order of removal.
Inspection
Check the rear stabilizer bar for deformation.
Check the rear stabilizer link ball joint for damage.
Was this page helpful?