Suspension System
Trailing Arm Repair procedures
In this manual: Suspension System
7steps
~42min
3/5difficulty
Done 0 of 7
Removal
Disconnect the battery negative cable.
Remove the wheel and tire.
Tightening torque: 107.9 - 128 N·m

Remove the parking brake cable pin (A).

Rotates the nut (A) in the counterclockwise direction and then remove the parking cable.

Loosen the parking brake cable nuts (A) and trailing arm nuts (B).
Tightening torque:
(A) 6.8 - 10,7 N·m
(B) 137.3 - 157 N·m

Loosen the parking brake cable bracket bolt (A) and trailing arm bolts (B) and then remove the trailing arm.
(A) 8.8 - 13,7 N·m
(B) 98.0 - 118 N·m

Install in the reverse order of removal.
Was this page helpful?