Suspension System

Rear Coil Spring Repair procedures

5steps
~30min
2/5difficulty
04080120160200127.594N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Removal

  1. Disconnect the battery negative cable.

  2. Remove the wheel and tire.

    Tightening torque: 107.9 - 128 N·m

  3. Loosen the rear lower arm bolt (A), rear shock absorber bolt (B) and stabilizer link bolt (C) and then remove the rear coil spring.

    Tightening torque:

    (A) 137.3 - 157 N·m

    (B) 98.0 - 118 N·m

    (C) 19.6 - 29 N·m

  4. Install in the reverse order of removal.

  5. Check the wheel alignment.

    (Refer to Suspension System - "Alignment")