Suspension System

Rear Upper Arm Repair procedures

8steps
~48min
3/5difficulty
04080120160200127.594N·mlb·ft
Tightening torque found on this page
Done 0 of 8

Removal

  1. Disconnect the battery negative cable.

  2. Remove the wheel and tire.

    Tightening torque: 107.9 - 128 N·m

  3. Loosen the wheel speed sensor bracket bolt (A) from the rear upper arm.

    Tightening torque: 6.8 - 10,7 N·m

  4. Loosen the bolt from the upper arm.

    Tightening torque: 137.3 - 157 N·m

  5. Loosen the upper arm bolt and then remove the upper arm.

    Tightening torque: 137.3 - 157 N·m

  6. Install in the reverse order of removal.

Inspection

  1. Check the bushing for wear and deterioration.

  2. Check all bolts and nuts.