Water Temperature Control Assembly Repair procedures
Removal and Installation
Water Temperature Assembly
Shut off the high voltage circuit.
(Refer to Engine Mechanical System - “High Voltage Shut off Procedure”)
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
Drain the coolant.
(Refer to Cooling System - Coolant")
Remove the air cleaner assembly.
(Refer to Intake and Exhaust System - "Air Cleaner")
Disconnect the purge control solenoid valve (PCSV) hose (A).

Disconnect the wiring connectors and harness clamps and remove the connector brackets around the water temperature assembly.

Remove the purge control solenoid valve (PCSV) bracket (A).

Disconnect the radiator upper hose (A).

Remove the EGR cooler pipe C (A).
Tightening torque : 18.6 - 24 N·m

Disconnect the oil cooler coolant hose (A) and ATF cooler coolant hose (B).

Disconnect the EGR cooler coolant hose (A).

Remove the EGR cooler pipe B (A).
Tightening torque : 18.6 - 24 N·m

Remove the electric control EGR valve from the water temperature assembly.
(Refer to Engine Control/Fuel System - "Electric EGR Control Valve")
Remove the water temperature control assembly (A).
Tightening torque :9.8 - 11,8 N·m

Install in the reverse order of removal.
Heater Pipe
Shut off the high voltage circuit.
(Refer to Engine Mechanical System - “High Voltage Shut off Procedure”)
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
Drain the coolant.
(Refer to Cooling System - Coolant")
Remove the air cleaner assembly.
(Refer to Intake and Exhaust System - "Air Cleaner")
Remove the water temperature control assembly.
Remove the intake manifold.
(Refer to Intake and Exhaust System - "Intake Manifold")
Remove the EGR cooler pipe C (A) and then disconnect the exhaust heat recovery system (EHRS) coolant hose (B).
Tightening torque : 18.6 - 24 N·m

Disconnect the coolant hose (A).

Disconnect the oil cooler coolant hose (A).

Remove the heater pipe (A).
Tightening torque : 18.6 - 24 N·m

Install in the reverse order of removal.