Fuses

The vehicle's electrical system is protected from electrical overload damage by fuses.

This vehicle has 2 (or 3) fuse panels, one located on the driver's side of the instrument panel and another in the engine compartment near the battery.

If any of the lights, accessories or controls on your vehicle do not work, check the corresponding circuit fuse. If a fuse has blown, the element inside the fuse will melt.

If the electrical system does not operate, first check the fuse panel on the driver's side.

Always replace a blown fuse with a fuse of the same rating.

If a replacement fuse blows, this indicates an electrical problem. Avoid using the system and contact an authorized Kia dealer immediately.

Three types of fuses are used: blade-type for lower current ratings, cartridge type, and multi-fuse for higher current ratings.

WARNING - Fuse Replacement

• Never replace a fuse with anything other than a fuse of the same rating.
• A fuse of higher rating may cause damage and fire.
• Never install wire or aluminum foil in place of the correct fuse, even as a temporary repair. This may cause severe wiring damage and possible fire.

CAUTION

Do not use a screwdriver or any other metal object to remove fuses, as this may cause a short circuit and damage the system.

✽ NOTICE

The actual fuse/relay panel label may differ from the equipped components.