Kia Sorento XM 2011-2023 Repair Manual

Yaw Rate and G-Sensor Installation

In this manual: Kia Sorento XM 2011-2023 Repair Manual
Kia Sorento XM Owner's Manual. — 168Kia Sorento XM 2011-2023 Repair Manual — 1285
3steps
~18min
2/5difficulty
Done 0 of 3

  1. Remove the ignition key from the vehicle.
  2. Install in the reverse order of removal.
  3. After installing the SRSCM, check that the system operates correctly:
    A. Turn the ignition ON; the SRS indicator should illuminate for about six seconds and then go off.
    A. The SRSCM detects vehicle rollover. SAB, CAB and BPT may deploy if the SRSCM is moved in the vehicle while the ignition is ON. For this reason, be sure to turn the ignition OFF before removing the SRSCM from the vehicle.
    B. When replacing the SRSCM, always perform variant coding. Also, perform the lateral G-sensor calibration. (Refer to Restraints - "SRS Control Module")

Test yourself

A quick Kia Sorento Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.