Heating, Ventilation, and Air Conditioning
Ambient Temperature Sensor Repair Procedures
In this manual: Heating, Ventilation, and Air Conditioning
9steps
~54min
2/5difficulty
Done 0 of 9
Inspection
- Turn the ignition off.
- Disconnect the ambient temperature sensor.
- Check the resistance of the ambient air temperature sensor between terminals 1 and 2, and verify that it changes with ambient temperature.
1. Sensor Ground 2. Ambient Sensor Signal
SpecificationAmbient Temperature
[°C(°F)]Resistance between Terminals 1 and 2 (kΩ) -10(14) 158,18 0 (32) 95,10 10 (50) 58,80 20 (68) 37,32 - If the measured resistance does not meet the specification, replace with a known good ambient air temperature sensor and verify correct operation.
- If the problem is resolved, replace the ambient temperature sensor.
Replacement
- Disconnect the negative (-) battery terminal.
- Remove the engine compartment cover. (Refer to Traction Motor System - "Under Cover")
- Disconnect the connector and remove the ambient air temperature sensor (A).
- Install in the reverse order of removal.
Test yourself
A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?