Battery

Repair Procedures

Inspection

Battery Voltage and Condition

Check the battery voltage and condition using a battery tester.

Battery Terminal

1. 1

   Move the battery terminals (A) back and forth to check whether they are loose or corroded. If the terminals are corroded, clean them.

   

   

   If the battery positive terminal is loose, disconnect the ground (GND) cable before attempting to remove or tighten the positive connection to prevent personal injury.

2. 2

   If the battery clamp on the positive (+) battery terminal is loose:

   1. Turn the ignition off and disconnect the negative (-) battery terminal.

   2. Tighten the battery clamp (A) on the positive (+) battery terminal.

      Positive (+) battery terminal:

      7,8–9.8 N·m

      

3. 3

   If the battery clamp on the negative (-) battery terminal is loose:

   1. Tighten the battery clamp (A) on the negative (-) battery terminal.

      Negative (-) battery terminal:

      7,8–9.8 N·m

      

Battery Condition

Inspect the battery for damage or deformation. If the battery is severely damaged, deformed, or leaking, replace the battery.