Steering

7steps
~42min
2/5difficulty
Done 0 of 7

Repair Procedures

Service Adjustment Procedure

Steering Wheel Play Inspection

  1. Turn the steering wheel so the front wheels face straight ahead.

  2. Measure the distance the steering wheel can be turned without moving the front wheels.

    Specification: 0–30 mm (1.1811 in) or less

  3. If the play exceeds the specified value, inspect the steering column, shaft, and linkage.

Inspection of Stationary Steering Effort

  1. Park the vehicle on a level surface and set the steering wheel in the straight-ahead position.

  2. Start the engine and turn the steering wheel lock to lock several times to warm up the power steering fluid.

  3. Attach a spring scale to the steering wheel. With the engine idling, pull the scale and read it as soon as the tires begin to rotate.

    Standard value: 3.0 kgf max.

  4. If the measured value exceeds the standard value, inspect the steering gear box.

Troubleshooting

Troubleshooting

Symptom Probable Cause Remedy
Steering wheel play Loose Clamp Cap Tighten
Steering Gear Mounting Bolts Loose Tighten
Loose or worn tie rod end Tighten or replace as necessary
Steering Wheel Does Not Return Properly Excessive Tie Rod End Turning Resistance Replace
Clamp Bolt Overtightened Adjust
Tie rod end and/or ball joint does not rotate smoothly Replace
Loose transaxle mounting bracket and/or worn steering shaft joint Tighten
Worn steering shaft joint and/or body bushing Repair or replace
Knocking or clunking in rack and pinion Loose transaxle bracket Tighten
Loose tie rod end and/or ball joint Tighten
Worn tie rod and/or ball joint Replace

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.