Kia Stinger CK Quiz
Body (Interior and Exterior)

Hood Top Cover

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
6steps
~36min
2/5difficulty
0102030405026.520N·mlb·ft
Tightening torque found on this page
Done 0 of 6

Components and Component Location

Component Location

1. Hood Top Cover

Repair Procedures

Replacement

  1. Remove the reservoir cover (A) after removing the mounting clips.

  2. Remove the cover (A) and loosen the nuts (B).

    Tightening torque: 22.6–26 N·m

  3. Remove the wiper arm (A).

  4. Disconnect the washer hose (A).

  5. Disconnect the clips, then remove the upper shroud cover (A).

  6. Install in the reverse order of removal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.