Kia Stinger CK Quiz
Restraints

Passenger Airbag (PAB) Module

In this manual: Restraints
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
7steps
~42min
2/5difficulty
010203040505.84N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Description and Operation

Description

The passenger airbag (PAB), installed inside the instrument panel, protects the front passenger in a frontal collision. The SRSCM determines whether and when the PAB should deploy.

Components and Component Location

Components

1. Passenger Airbag (PAB)

Repair Procedures

Removal

  1. Disconnect the negative battery terminal and wait at least three minutes before starting work.

  2. Remove the main instrument panel cover.

    (Refer to Body (Interior and Exterior) - "Main Pad Assembly")

  3. Remove the PAB mounting bolts.

    Tightening torque: 3.8–5.8 N·m

Installation

  1. Disconnect the negative battery terminal and wait at least three minutes before starting work.

  2. Install in the reverse order of removal.

  3. Reconnect the negative battery terminal.

  4. After installing the passenger airbag (PAB), check that the system operates correctly:

    Turn the ignition switch ON. The SRS indicator should illuminate for approximately six seconds and then turn off.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.