Kia Cee'd Quiz
Dual Clutch Transmission (DCT) System

Input Speed Sensor 2 Repair Procedures

In this manual: Dual Clutch Transmission (DCT) System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
4steps
~24min
2/5difficulty
010203040509.87N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Inspection

Refer to DTC "P2765, P2766" Input Shaft Speed Sensor.

Removal

  1. Turn the ignition switch OFF, then disconnect the battery negative (-) cable.
  2. Remove the under cover.
  3. Disconnect the input speed sensor connector (A).
  4. Remove the mounting bolt and remove the input shaft speed sensor (B).

Installation

  1. Install in the reverse order of removal.

    Tightening torque: 7.8 ~ 9.8 N·m

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.