Kia Cee'd Quiz
Dual Clutch Transmission (DCT) System

Shift Cable Repair Procedures

In this manual: Dual Clutch Transmission (DCT) System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
11steps
~66min
3/5difficulty
0102030405014.711N·mlb·ft
Tightening torque found on this page
Done 0 of 11

Removal

  1. Remove the floor console assembly. (Refer to Body - "Floor Console".)
  2. Remove the air duct.
  3. Remove the control cable (A).
  4. Remove the clip (A) and nut (B).

    Tightening torque: 11.8 ~ 14.7 N·m

  5. Remove the nut (A) from the manual control lever.

    Tightening torque: (A): 9.8 ~ 14.7 N·m

  6. Remove the cable (C) from the cable bracket (B) on the dual clutch transmission (DCT).
  7. Remove the shift cable by pulling it inward.

Installation

  1. Install in the reverse order of removal.

Adjustment

  1. Place the shift lever in the interior and the transmission manual control lever in the N position.
  2. Connect the shift lever (B) in the interior to the shift cable (A).
  3. Lightly push the shift cable in direction "F" to tension the cable.
  4. Tighten the nut (A) to the specified torque.

    Tightening torque: 9.8 ~ 14.7 N·m

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.