Kia Optima DL3 Quiz
Suspension System

Rear Auxiliary Arm

In this manual: Suspension System
General Information — 8Advanced Driver Assistance System (ADAS) — 21Maintenance — 27Engine Mechanical System — 45Engine Electrical System — 11Emission Control System — 11Engine Control System/Fuel System — 25Automatic Transmission — 20Drive Shaft and Axle — 7Suspension System — 22Steering — 7Restraints — 11Brake System — 22Body (Interior and Exterior) — 116Body Electrical System — 90Heating, Ventilation, and Air Conditioning — 32
8steps
~48min
2/5difficulty
050100150200250156.9116N·mlb·ft
Tightening torque found on this page
Done 0 of 8

Repair Procedures

Removal

  1. Disconnect the negative (-) battery cable.

  2. Remove the rear wheel and tire.

    (Refer to Tires/Wheels — "Wheel")

  3. Loosen the bolt and nut and remove the rear toe control arm (A).

    Tightening Torque

    Rear Carrier: 137.3 – 157 N·m (14.0 – 16.0 kgf·m, 101.3 – 115.7 lb·ft)

    Rear Subframe: 107.8 – 118 N·m

Inspection

  1. Inspect the bushing for wear and damage.

  2. Check the rear assist arm for deformation.

  3. Check that all bolts and nuts are present.

Installation

  1. Install in the reverse order of removal.

  2. Check the alignment.

    (See Suspension System - Alignment)

Test yourself

A quick Kia Optima DL3 quiz: every answer comes with an explanation and a link to the manual page.