System Setting and Activation

System Settings

• The Driver Attention Warning system is set to the normal position when your vehicle is first delivered from the factory.
• To activate the Driver Attention Warning system, start the engine, then select "User Settings → Driver Assistance → Driver Attention Warning → High Sensitivity / Normal Sensitivity / Off" on the LCD display.
• The driver can select the Driver Attention Warning mode.
  - Off: The Driver Attention Warning system is deactivated.
  - Normal Sensitivity: The Driver Attention Warning system warns the driver when the driver's level of fatigue or inattentive driving is detected.
  - High Sensitivity: The Driver Attention Warning system warns the driver of his/her level of fatigue or inattentive driving sooner than in normal mode.
• The Driver Attention Warning system setting will be saved and applied when the engine is restarted.

Driver Attention Level Display

• The driver can check the driving conditions on the LCD display.
  - Select "User Settings Mode," then "Driver Assistance" on the LCD display. (For more details, refer to "LCD Display" in chapter 4.)
• The driver attention level is displayed on a scale from 1 to 5. The lower the number, the less attentive the driver.
• The number decreases when the driver does not take a break for a certain period of time.
• The number increases when the driver drives attentively for a certain period of time.
• When the driver turns on the system while driving, the "Last Break Time" and the driver's level are displayed.

Take a Break

• The message "Consider taking a break" appears on the LCD display and a warning sounds to suggest the driver take a break when the driver's attention level is below 1.
• The Driver Attention Warning system does not suggest a break to the driver when the total driving time is less than 10 minutes.