Kia Picanto JA Quiz
Body (Interior and Exterior)

Hood Top Cover

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 30Engine Mechanical System — 46Engine Electrical System — 14Emission Control System — 11Engine Control System/Fuel System — 46Clutch System — 12Manual Transmission — 10Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 17Brake System — 22Body (Interior and Exterior) — 104Body Electrical System — 80Heating, Ventilation, and Air Conditioning — 17
5steps
~30min
2/5difficulty
0102030405026.520N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Components and Component Location

Component Location

1. Hood Top Cover

Repair Procedures

Replacement

  1. Remove the cap (A) and nuts (B), then remove the wiper arm (C).

    Tightening torque: 22.6–26 N·m

  2. Disconnect the washer hose (A).
  3. Remove the hood side cover (A).
  4. Disconnect the clips, then remove the upper shroud cover (A).
  5. Install in the reverse order of removal.

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.