Floor Carpet

Components and Component Location

Component Location

Repair Procedures

Replacement

1. 1
   Remove the front console assembly. (Refer to Floor Console - "Floor Console Assembly")
2. 2
   Remove the accelerator pedal. (Refer to Engine Control System - "Accelerator Position Sensor (APS)")
3. 3
   Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")
4. 4
   Remove the rear seat assembly. (Refer to Rear Seat - "Rear Seat Assembly")
5. 5
   Using a trim removal tool, remove the front door sill trim (A).

   

6. 6
   Remove the hood latch handle (A) using a puller.

   

7. 7
   Using a trim removal tool, remove the hood side trim (A).

   

8. 8
   Remove the rear door sill trim (A) after loosening the screws.

   

9. 9
   Disconnect the seat belt (B) from the EFD system (A).

   

10. 10
    Using a trim removal tool, remove the center pillar lower trim (A).

    

11. 11
    Remove the parcel shelf (A).

    

12. 12
    Remove the rear cross garnish (A).

    

13. 13
    Disconnect the lower anchor of the rear seat belt (A) after loosening the mounting bolt.

    Torque: 39.2 – 54 N·m

    

14. 14
    Remove the rear seat folding bracket (A) after loosening the bolts.

    

15. 15
    Remove the luggage compartment side trim (A) after loosening the fixing screws.

    

16. 16
    Disconnect the luggage compartment lamp connector (A).

    

17. 17
    Remove the floor carpet (A).

    

18. 18
    Install in the reverse order of removal.