Kia Picanto JA Quiz
Body (Interior and Exterior)

Front Bumper Assembly

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 30Engine Mechanical System — 46Engine Electrical System — 14Emission Control System — 11Engine Control System/Fuel System — 46Clutch System — 12Manual Transmission — 10Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 17Brake System — 22Body (Interior and Exterior) — 104Body Electrical System — 80Heating, Ventilation, and Air Conditioning — 17
7steps
~42min
3/5difficulty
Done 0 of 7

Components and Component Location

Component Location

1. Front bumper cover

Repair Procedures

Replacement

  1. Loosen the bolts and clips securing the upper radiator cover.
  2. Remove the engine undercover (A).
  3. Remove the mounting clips (A) of the front wheel guard.
  4. Separate the side of the front bumper after loosening the side screws and front bumper clips.
  5. Disconnect the front bumper main connector (A).
  6. Remove the front bumper cover (A).
  7. Install in the reverse order of removal.

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.