Kia Picanto JA Quiz
Body (Interior and Exterior)

Front Seat Belt Pretensioner

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 30Engine Mechanical System — 46Engine Electrical System — 14Emission Control System — 11Engine Control System/Fuel System — 46Clutch System — 12Manual Transmission — 10Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 17Brake System — 22Body (Interior and Exterior) — 104Body Electrical System — 80Heating, Ventilation, and Air Conditioning — 17
5steps
~30min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Components and Component Location

Component Location

1. Front Seat Belt Pretensioner

Repair Procedures

Replacement

  1. Remove the center pillar upper garnish. (Refer to Body Trim - "Center Pillar Garnish")
  2. Remove the front seat belt upper anchor (A) after loosening the mounting bolt.

    Torque: 39.2 – 54 N·m

  3. Remove the front seat belt pretensioner (A) after loosening the bolts. Tightening torque: Lower: 39.2–54 N·m Upper: 7.8–11.8 N·m
  4. Disconnect the connector (A).
  5. Install in the reverse order of removal.

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.