Kia Rio YB Quiz
Heating, Ventilation, and Air Conditioning

Blower Resistor (MANUAL)

In this manual: Heating, Ventilation, and Air Conditioning
General Information — 8Maintenance — 31Engine Mechanical System — 44Engine Electrical System — 14Emission Control System — 9Engine Control System/Fuel System — 30Clutch System — 10Manual Transmission — 10Automatic Transmission — 23Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 14Brake System — 22Body (Interior and Exterior) — 115Body Electrical System — 84Heating, Ventilation, and Air Conditioning — 28
5steps
~30min
2/5difficulty
Done 0 of 5

Repair Procedures

Inspection

  1. Measure the resistance between the terminals.

  2. If the measured resistance does not meet the specification, replace the blower resistor. (After removing the resistor)

Replacement

  1. Disconnect the negative (-) battery terminal.

  2. Disconnect the connector (A) and remove the blower resistor (B) after loosening the mounting screws.

  3. Installation is the reverse of removal.

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.