Kia Rio YB Quiz
Suspension System

Wheel

In this manual: Suspension System
General Information — 8Maintenance — 31Engine Mechanical System — 44Engine Electrical System — 14Emission Control System — 9Engine Control System/Fuel System — 30Clutch System — 10Manual Transmission — 10Automatic Transmission — 23Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 14Brake System — 22Body (Interior and Exterior) — 115Body Electrical System — 84Heating, Ventilation, and Air Conditioning — 28
3steps
~18min
2/5difficulty
04080120160200127.594N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Repair Procedures

Hub Nut Tightening Sequence

Tighten the hub nuts as follows.

Tightening torque: 107.9–128 N·m

Perform inspection

  1. Raise the vehicle.

  2. Measure wheel runout with a dial indicator as shown in the illustration below.

    Run out Aluminum
    Radial mm (in) Below 0.3 (0.0118)
    Lateral mm (in) Below 0.3 (0.0118)

  3. If the measured value exceeds the specified value, replace the wheel.

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.