When the trunk lid cannot be opened

If the vehicle battery is discharged or the electrical system is faulty and the trunk lid does not unlock, perform the following steps to unlock it:

(Hatchback)

CAUTION

• When performing the following steps, cover the sharp edges of the lid with thick cloth to avoid injury.
• Be careful when using a flat-blade screwdriver so as not to damage adjacent surfaces or vehicle components.

1. Fold down the rear seatback.

See "Folding the Split/One-piece Seatback" on page 2-8.

2. Pull out the center part of the plastic clips and remove them, then remove the cover from the inside surface of the trunk lid.

3. Use a flat-blade screwdriver to open the inner cover.

4. Use a flat-blade screwdriver to turn the lever to the right to unlock the trunk lid.

(Sedan)

1. Open the trunk lid.

2. Slide the lever to the left to fold down the seatback.

3. Slide the lever to the left to open the trunk lid.

After performing these steps, have the vehicle checked by a qualified service facility as soon as possible. We recommend a Mazda Authorized Service Center.