Mazda 2 Quiz
Interior comfort

Using the Bluetooth Audio System

In this manual: Interior comfort
Driving — 65Operation and maintenance — 45IN AN EMERGENCY — 45Interior comfort — 40Technical data — 4Customer Information — 9Getting to know your Mazda — 32Standard Safety Equipment — 24Your Vehicle - At a Glance — 12Fuel Requirements (SKYACTIV-G 1.3, SKYACTIV-G 1.5) — 1Fuel Requirements (SKYACTIV-D 1.5) — 1Emission Control System (SKYACTIV-G 1.3, SKYACTIV-G 1.5) — 1Emission Control System (SKYACTIV-D 1.5) — 1Engine Exhaust Emissions (Carbon Monoxide) — 1Replacing Exterior Light Bulbs — 1Replacing interior bulbs — 1
~2min read

Turning on Bluetooth audio mode

To listen to recordings from a portable Bluetooth audio device and operate it using the vehicle's audio system control panel, turn on Bluetooth audio mode. Each portable Bluetooth audio device must be paired with the vehicle's Bluetooth system before it can be used.

See "Preparing a Portable Bluetooth Device (Type A/Type B)" on page 5-94.

1. Turn on the portable Bluetooth audio device.

2. Set the ignition switch to ACC or ON.

Make sure the "" symbol is displayed on the audio system display. The symbol is
not displayed if you are using an unpaired portable Bluetooth audio device or if there is a malfunction in the vehicle's Bluetooth system.

CAUTION

Some Bluetooth audio devices need a certain amount of time before the symbol " " will
be displayed.

3. Press the media button (), to switch to Bluetooth audio mode and start playback.

If the AVRCP profile on the device is earlier than version 1.3: "BT Audio" is displayed.

If the AVRCP profile on the device is version 1.3: The playback time is displayed.

CAUTION

  • If playback from the portable Bluetooth audio device does not start, press the Play/Pause button (4).

  • If a phone call comes in on a phone connected to the hands-free system while playing audio from a portable Bluetooth audio device, playback is paused. Playback from the portable Bluetooth audio device resumes after the call ends.

Playback

1. Set the operating mode to Bluetooth audio to play recordings from a portable Bluetooth audio device through the vehicle's speakers. (See "Turning on Bluetooth Audio Mode") 2. To pause playback, press the Play/Pause button (4).

3. Press the button again to resume playback.

Selecting a file (track)

Selecting the next file (track)

Briefly press the track change button ( ).


Selecting the start of the current file (track)

Briefly press the track change button ().


Fast forward/rewind (AVRCP version 1.3)

Fast forward

Press and hold the fast-forward button ( ).


Rewind

Press and hold the rewind button ( ).


Display switching (AVRCP version 1.3 only)

The information shown on the audio system display changes as described below each time the button (3) is pressed during playback.


CAUTION

  • If the track title is not available, "NO TITLE" is displayed.

  • The system cannot display some characters. Characters that cannot be displayed are replaced with an asterisk ( ).

Scrolling the Display

Only 13 characters can be displayed at one time. To display the rest of a long title, press the button (3). The next 13 characters will be displayed. After the last 13 characters of the title are displayed, press the button (3) again to return to the beginning of the title.

Test yourself

A quick Mazda 2 quiz: every answer comes with an explanation and a link to the manual page.