Accessories
Antenna Feeder No.5 Inspection
In this manual: Accessories
~1min read
1. Disconnect the negative battery cable..
2. Remove the following parts:
a. Front scuff plate (RH).
b. Front side trim (RH).
c. Rear seat cushion.
d. Rear scuff plate (RH).
e. Tire house trim (RH).
3. Disconnect the antenna feeder No.4.

4. Disconnect the antenna feeder No.3.

5. Verify that the continuity between antenna feeder No.5 terminals is as indicated in the table.

If not as indicated in the table, replace antenna feeder No.5.

Test yourself
A quick Mazda 3 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?