Accessories
Confirmation Step 3: Antenna System Simple Inspection [Radio]
In this manual: Accessories
~1min read
Because the antenna system is equipped with a capacitor, the continuity cannot be checked. Therefore proceed the following simple inspection.
Turn the AM radio on.
Tune to the frequency that there is no broadcast and you will hear a buzzing sound.
Turn a work light on and shake it around the antenna rod. (around 10—20 mm {0.40—0.78 in})
CAUTION:Use a fluorescent light type for the inspection. Accurate diagnostic cannot be done with a different type of light.

If a whirring sound from the speaker synchronized to the work light movement is confirmed, the antenna system is normal.
Test yourself
A quick Mazda 3 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?