Antenna Feeder No.5 Removal/Installation

1. Disconnect the negative battery cable..

2. Remove the following parts:

a. Front scuff plate (RH).

b. Front side trim (RH).

c. Rear scuff plate (RH).

d. B-pillar lower trim (RH).

e. Rear seat cushion.

f. Tire house trim (RH).

3. Partially peel back the floor covering.

4. Disconnect the antenna feeder No.4.

5. Remove the clips A and B.

6. Disconnect the antenna feeder No.3.

7. Remove the clips C, D and E.

8. Remove the antenna feeder No.5.

9. Install in the reverse order of removal.